ParaPak High Speed Engraving System
ParaPak High Speed Engraving System
We have included every element that you will need to get your own engraving studio operational. This system includes all of the full service support options, which allows us to help you adapt this powerful system to your personal circumstances.
The ParaPak contains the following:
Ultra High-Speed Handpiece
This commercial grade ultra high speed handpiece is the heart of our high speed engraving systems. This air-driven handpiece is comfortable in your hand and rotates at over 400,000 rpm, with no vibration. That’s ten times faster than what others call, “high speed”. We offer the best warranty in the business, because we guarantee this is the best high speed handpiece on the market today.
Your ParaPak System comes with a spare turbine, insuring that you will never have down time. Turbine comes with a 2 year warranty.
Automatic Filter/Regulator/Lubricator (F/R/L)
All compressors create dust and humidity problems that can cause serious damage to High-Speed air turbines. This all-in-one unit will regulate the air pressure delivered to your handpiece, while filtering out harmful particles in the air. It also has an automatic lubricator built in. Our Patented "micro-fog" unit is the most precise lubricator in the industry. It will extend the life of your equipment and make lubrication "worry-free". Simply fill the bowl with our high speed oil and set the drip rate. The lubricator will deliver just the right amount of oil to your handpiece to make it last for years, without you even knowing it is being oiled.
Parapoint Burr Sampler--Cutters (2 Sets)
Choosing which burrs you will need is very difficult when you are just getting started. There is a huge range of quality in engraving burrs (cutters) that you need to be aware of. Our Engraving Systems include the finest grade burrs. This Burr Sampler contains 12 premium diamonds and 12 premium carbides. We have packaged the most popular diamond and carbide burrs in a re-useable plastic case for your convenience. Each burr is labeled and even has a picture below it, taking the guess-work out of trying to remember which is which. This is essential to making sure you are using the correct bur while following the training DVD’s. These same cutters will engrave the hardest metals to the most delicate eggshells and every surface in between. You will receive two complete burr samplers with The ParaPak.
Compressor Hose, Tubing, and Fittings
This hose will deliver the air from your compressor to your Filter/Regulator/Lubricator Unit (FRL). We have designed this hose for portability. It is just the right size to provide plenty of air volume, yet flexible for portability and storage. The quick disconnect fittings included with the hose will quickly adapt to all of our systems and any adequate compressor.
Quiet Compressor in Traveling Case
Quiet, Portable Compressor Combo featuring a portable 1hp compressor inside a commercial grade quiet box, perfect for engraving at events or anywhere noise and space are concerns.
Powercrafter has taken our popular Rollaway Storage Case and transformed it into a quiet box to house a portable compressor. With the fan and vents built right into the sides of the case, you can now operate the compressor inside the case, with the lid closed. This cuts down the noise level significantly, while keeping the compressor cool while in operation.
The case is perfect for engraving on the road such as at public events or trade shows because of it's built in wheels and telescoping handle. No more lugging heavy compressors around, now you can simply roll it in with you and use the compressor right inside the case.
Features of our Rollaway Quiet Compressor Combo:
- Powercrafter 1 hp Portable Compressor - See it Here.
- Black Rollaway Case - See it Here. - but keep in mind, with this combo, you get built in fan and vents.
- Built in Fan, Vents, Chords - installed inside black rollaway case.
- 15' Compressor Hose with Powercrafter Quick Connect Fittings
- Telescoping Handle with Wheeled Case for easy transportation.
- Locking Case - Combination locks on top
- Front flap storage compartment
- Inside storage dividers in lid
- Approximately 21 lbs (includes case with compressor and hose inside)
- Dimensions are 18"L x 11"W x 15H"
- Includes everything needed to connect to Powercrafter Filter/Regulator Unit including quick connect fittings.
The carrying case will allow you to easily transport, store and protect your engraving equipment.
Ultra-High Speed Lubrication - 8 oz.
Our Turbo 300 contains special bearings that require very little lubrication to provide many years of trouble-free service. However, lubrication is vital to the life of any bearings. When used in the automatic filter/regulator/lubricator unit (F/R/L), this oil will ensure the bearings in your handpiece are properly lubricated. You will also use this bottle of oil to clean the turbine in your handpiece. One bottle should last for months if not longer. (Lubrication is not needed if you select an oil-less handpiece)
Photo Sensitive Pattern Film -100 Sheets
This is the “magic” paper that puts those of us who couldn’t draw a stick figure if we had to on equal ground with artists. First, take your artwork and copy it onto this film using any laser printer or copy machine. Second, remove the thin layer from the back of the film, exposing the sticky-back. Third, place it onto the surface of your engraving project. Removable adhesive will even allow you to lift the film and re-position it if you don’t get it right the first time. Fourth, engrave right through the film. Your handpiece will not even know it’s there. When finished, peel off the remaining film and discard. Professional results every time. Specially formulated adhesive will not leave any sticky residue on your projects.
Set up DVD's - Instruction and Basic Engraving Course
Over five hours of DVD instruction. The first two DVD’s will show you how to properly set up, clean and maintain your high speed system. You will learn how to regulate the air pressure on your FRL, how to set the drip rate on your lubricator, how to properly clean your handpiece, warning signs to watch out for and much, much more. The next three DVD’s will take you through a basic engraving course on which burrs to use on different surfaces. Learn how to engrave and carve wood, metal, eggshells and more.
Burr Push Tool
This is a tool designed to help you insert sharp burs into your Handpiece without breaking the tip of the burr.
In addition to our set up DVD’s, you will receive a printed instruction manual. It contains valuable set up information, engraving tips and techniques, turbine cleaning instructions, warranty information and more. In case you have a question, you will be able to refer to this printed manual instead of re-playing a DVD.
Introductory Artwork CD Rom
Over one hundred (100) pages of artwork in pdf format for you to use in your own projects. This makes it convenient to search for your design and only print the patterns you like. Designs include animals, wedding patterns, floral designs and a lot more. Simply put the CD into your computer and print it out in any size you want. You can even print directly onto your stencil film.
This sturdy plastic stand is designed to hold and protect your handpiece while not in use.
Safety Glasses and Respirators
For your safety, always use safety glasses and a respirator while engraving. They are both included in your kit.
12 DVD's from Our Training Library
Our training library contains a variety of training DVD's. Choose from topics including eggshells, wood, knives, glass and much more. These DVD's will show you which burrs to use and give tips and techniques to produce your desired results.
This system also includes Dr. Lew Jensen's new book set "Opportunity Intersection", a seven book series with DVD's on marketing your artwork.
2 Year Turbine Warranty
Two year warranty on the turbine.
Use this wire brush to remove the rough edges while engraving on glass. Taking the edges off gives a soft, professional look.
A scraper will allow you to easily remove the stencil film from your projects without scratching. Also includes five extra blades.
Extend the life of your diamond burrs by cleaning them with this abrasive stone. Diamond burrs (cutters) tend to get "gummed" up when sanding wood or using them on softer surfaces. They are usually not worn out, they just need to be cleaned. Simply touch the diamond burr to this cleaning stone while your engraver is running to clean the diamond tip.
The ParaPak High Speed Engraving System is the best Home Studio Set Up System available today!