Masters Engraving System

Profitable Hobbies Master's System is one of our most popular high speed engraving systems. It includes all the necessary equipment, including a Compressor (with Quiet Box), needed to get a great start at making money with high speed engraving. A full five hour DVD training course is included with the Masters System. 

The Masters Engraving System Includes:

 

Ultra High-Speed Handpiece


 

Automatic Filter/Regulator/Lubricator (F/R/L)

All compressors create dust and humidity problems that can cause serious damage to High-Speed air turbines.  This all-in-one unit will regulate the air pressure delivered to your handpiece, while filtering out harmful particles in the air.  It also has an automatic lubricator built in. Our Patented "micro-fog" unit is the most precise lubricator in the industry. It will extend the life of your equipment and make lubrication "worry-free". Simply fill the bowl with our high speed oil and set the drip rate. The lubricator will deliver just the right amount of oil to your handpiece to make it last for years, without you even knowing it is being oiled.

 

Parapoint Burr Sampler--Cutters

Choosing which burrs you will need is very difficult when you are just getting started. There is a huge range of quality in engraving burrs (cutters) that you need to be aware of.  Our Engraving Systems include the finest grade burrs.  This Burr Sampler contains 12 premium diamonds and 12 premium carbides.  We have packaged the most popular diamond and carbide burrs in a re-useable plastic case for your convenience. Each burr is labeled and even has a picture below it, taking the guess-work out of trying to remember which is which. This is essential to making sure you are using the correct bur while following the training DVD’s. These same cutters will engrave the hardest metals to the most delicate eggshells and every surface in between. 

 

Compressor Hose, Tubing, and Fittings

This hose will deliver the air from your compressor to your Filter/Regulator/Lubricator Unit (FRL). We have designed this hose for portability. It is just the right size to provide plenty of air volume, yet flexible for portability and storage. The quick disconnect fittings included with the hose will quickly adapt to all of our systems and any adequate compressor.

 

Carrying Case

The carrying case we now use is different from the one pictured. We now use a very nice Solo carrying case to allow you to easily transport, store and protect your engraving equipment.  This attractive carrying case will also reflect your professional image in the marketplace.


Ultra-High Speed Lubrication - 8 oz.

Our Powercrafter contains special bearings that require very little lubrication to provide many years of trouble-free service. However, lubrication is vital to the life of any bearings.  When used in the automatic filter/regulator/lubricator unit (F/R/L), this oil will ensure the bearings in your handpiece are properly lubricated. You will also use this bottle of oil to clean the turbine in your handpiece. One bottle should last for months if not longer.

 

Photo Sensitive Pattern Film -50 Sheets

This is the “magic” paper that puts those of us who couldn’t draw a stick figure if we had to on equal ground with artists. First, take your artwork and copy it onto this film using any laser printer or copy machine. Second, remove the thin layer from the back of the film, exposing the sticky-back. Third, place it onto the surface of your engraving project. Removable adhesive will even allow you to lift the film and re-position it if you don’t get it right the first time. Fourth, engrave right through the film. Your handpiece will not even know it’s there. When finished, peel off the remaining film and discard.  Professional results every time. Specially formulated adhesive will not leave any sticky residue on your projects.

 

Set up DVD's - Instruction and Basic Engraving Course

Over five hours of DVD instruction. The first two DVD’s will show you how to properly set up, clean and maintain your high speed system. You will learn how to regulate the air pressure on your FRL, how to set the drip rate on your lubricator, how to properly clean your handpiece, warning signs to watch out for and much, much more. The next three DVD’s will take you through a basic engraving course on which burrs to use on different surfaces. Learn how to engrave and carve wood, metal, eggshells and more.


 
Burr Push Tool

This is a tool designed to help you insert sharp burs into your Handpiece without breaking the tip of the burr.

 

Instruction Manual

In addition to our set up DVD’s, you will receive a printed instruction manual. It contains valuable set up information, engraving tips and techniques, turbine cleaning instructions, warranty information and more. In case you have a question, you will be able to refer to this printed manual instead of re-playing a DVD.

 

Introductory Artwork CD Rom

Over one hundred (100) pages of artwork in pdf format for you to use in your own projects. This makes it convenient to search for your design and only print the patterns you like. Designs include animals, wedding patterns, floral designs and a lot more. Simply put the CD into your computer and print it out in any size you want. You can even print directly onto your stencil film.

 

Handpiece Stand

This sturdy plastic stand is designed to hold and protect your handpeice while not in use.

 

Safety Glasses and Respirators

For your safety, always use safety glasses and a respirator while engraving. They are both included in your kit.

Wire Brush

Use this wire brush to remove the rough edges while engraving on glass. Taking the edges off gives a soft, professional look.

Glass Scraper

A scraper will allow you to easily remove the stencil film from your projects without scratching. Also includes five extra blades.

Portable Compressor

This is the same compressor set up Profitable Hobbies has used for many years at trade shows and other public events all over the United States. Compressor is inside our Custom Quiet Box which includes a built in fan and chords to keep the compressor quiet and cool while operating inside the quiet box.